Office Address
- G/81, Ground Floor, C Sarvodaya Nagar, Panjrapole 1st Lane Madhav Baug, Mumbai - 400004
- sales@nirvaanoverseas.com
- +91 77386 88058
- +91 2231447403 Call Now
Office Address
Technical Product Details
| Material Grade | High-Corrosion Resistant Marine-Grade Magnesium-Aluminium Alloy (Aluminium 5052 / UNS A95052 / AlMg2,5). |
| Governing Specifications | ASTM B209, ASME SB209, AMS 4015, AMS 4016, EN 485, BS 1470, DIN 1725. |
| Available Tempers | 5052-O (Annealed), 5052-H32 (Quarter Hard & Stabilized), 5052-H34 (Half Hard & Stabilized), 5052-H38 (Full Hard). |
| Dimensional Scope | Thickness: 0.25 mm to 200 mm | Width: 1000 mm to 3500 mm | Length: 2000 mm to 12000 mm (Cut-to-Size available). |
| In-House Quality Verification | Spectro Chemical PMI, Vernier Caliper & Micrometer Dimensional Checks, Ultrasonic Testing (UT) per ASTM A388/A578, EN 10204 3.1 Mill Test Certificates. |
Table of Contents
Nirvaan Overseas is a premier Aluminium 5052 Sheets & Plates Manufacturer in India, processing superior non-heat-treatable marine-grade 5052 alloy stock. Aluminium 5052-H32 Sheets feature exceptional resistance to saltwater corrosion, high workability, and fatigue strength for harsh marine and industrial environments.
Our precision rolling lines process flat stock to strict gauge tolerances with smooth, burr-free surfaces. As a trusted Aluminium 5052 Sheets & Plates Supplier, every batch includes EN 10204 3.1 Material Test Certificates (MTC), ultrasonic testing logs, and spectro chemical validations.
As a globally trusted Aluminium 5052 Sheets & Plates Exporter, we supply certified non-corrosive plates across the Middle East, Europe, Southeast Asia, and the United States. Also explore our Aluminium 6061 Sheets & Plates built for high-strength structural engineering requirements.
| Parameter | Specification Details |
|---|---|
| Standard | ASTM B209, ASME SB209, AMS 4015, AMS 4016, BS, DIN, EN |
| Technique | Hot Rolled Plate (HR), Cold Rolled Sheet (CR) |
| Thickness | 0.25 mm to 200 mm |
| Width | 1000 mm to 3500 mm |
| Length | 2000 mm to 12000 mm (or custom lengths) |
| Surface Finish | 2B, 2D, BA, No. 1, No. 4, No. 8, 8K Mirror, Hairline, Sand Blast, Brushed, Etched, Checkered, Embossed |
| Value Added Services | Precision Laser Cutting, Waterjet Cutting, Shearing, Bending, Anodizing |
Sheets & Plates Weight Calculator
Theoretical Density: 2.68 g/cm³
| STANDARD | WERKSTOFF NR. | UNS | ISO | EN |
|---|---|---|---|---|
| Aluminium 5052 | 3.3523 | A95052 | AlMg2,5 | AW-AlMg2,5 |
| Element | Min (%) | Max (%) |
|---|---|---|
| Silicon (Si) | — | 0.25 |
| Iron (Fe) | — | 0.40 |
| Copper (Cu) | — | 0.10 |
| Manganese (Mn) | — | 0.10 |
| Magnesium (Mg) | 2.20 | 2.80 |
| Chromium (Cr) | 0.15 | 0.35 |
| Zinc (Zn) | — | 0.10 |
| Titanium (Ti) | — | 0.15 |
| Others (Total) | — | 0.15 |
| Aluminium (Al) | Balance | Balance |
| Temper / Condition | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) min | Brinell Hardness |
|---|---|---|---|---|
| 5052-O (Annealed) | 170 – 215 | 65 min | 14 | 47 |
| 5052-H32 (Quarter Hard) | 210 – 260 | 130 min | 12 | 60 |
| 5052-H34 (Half Hard) | 235 – 285 | 180 min | 8 | 68 |
| 5052-H38 (Full Hard) | 270 min | 220 min | 5 | 77 |
As a recognized Aluminium 5052 Sheets & Plates Exporter, Nirvaan Overseas delivers fully certified material worldwide:
Mumbai
Pune
Chennai
Faridabad
Saudi Arabia
Qatar
Oman
Kuwait
Germany
Italy
Netherlands
Poland
Singapore
Malaysia
Vietnam
Indonesia
Michigan
Illinois
Texas
| Inspection Method | Evaluation Parameters |
|---|---|
| Spectro Chemical PMI | Verifies chemical composition and alloy element percentages (Mg/Cr ratios). |
| Dimensional Metrology | Vernier Caliper and Micrometer gauge checks ensuring thickness, width, and flatness tolerances. |
| Ultrasonic Testing (UT) | Non-destructive scanning per ASTM A388 / ASTM A578 checking internal soundness and laminar flaws. |
| Mechanical & Hardness | Room-temperature tensile, yield, elongation, and Brinell hardness testing against temper limits. |
| Traceability & Certification | Heat number traceability with EN 10204 3.1 Mill Test Certificates (MTC) and optional third-party testing (SGS/TUV). |
Aluminium 5052-H32 Sheets are quarter-hardened, offering better bendability, while Aluminium 5052-H34 Sheets are half-hardened providing higher tensile yield strength for rigid panels.
Grade 5052 contains 2.5% magnesium and chromium, creating a self-passivating oxide layer that prevents saltwater pitting and atmospheric corrosion.
A reliable Aluminium 5052 Sheets & Plates Supplier provides EN 10204 3.1 MTCs with spectro chemical analysis, tensile test reports, and ASTM/AMS compliance logs.
Yes, as an established Aluminium 5052 Sheets & Plates Exporter, we regularly ship certified marine-grade stock to clients in Germany, Italy, Netherlands, and Poland.
Yes, we provide fast direct export deliveries across the GCC region, supplying certified project shipments to customers in Saudi Arabia, UAE, Qatar, Oman, and Kuwait.
Contact Nirvaan Overseas for competitive factory pricing, custom cut-to-size processing, and swift global dispatch across all 5052 material grades. Reach out to our technical sales team via email or WhatsApp for an instant project quote.