Office Address
- G/81, Ground Floor, C Sarvodaya Nagar, Panjrapole 1st Lane Madhav Baug, Mumbai - 400004
- sales@nirvaanoverseas.com
- +91 77386 88058
- +91 2231447403 Call Now
Office Address
Technical Product Details
| Material Grade | High-Strength Aerospace Zinc-Magnesium-Copper Aluminium Alloy (Aluminium 7075 T651 / UNS A97075 / AlZn5.5MgCu). |
| Governing Specifications | ASTM B209, ASME SB209, AMS 4045, AMS 4078, EN 485, EN 573, QQ-A-250/12. |
| Temper Condition | 7075-T651. |
| Dimensional Scope | Thickness: 0.25 mm to 200 mm | Width: 1000 mm to 3500 mm | Length: 2000 mm to 12000 mm (Cut-to-Size available). |
| In-House Quality Verification | Spectro Chemical PMI, Vernier Caliper & Micrometer Dimensional Checks, Ultrasonic Testing (UT) per ASTM A388/A578, EN 10204 3.1 Mill Test Certificates. |
Table of Contents
Nirvaan Overseas is a premier Aluminium 7075 T651 Sheets & Plates Manufacturer in India, precision-rolling aircraft-grade 7075 alloy stock. Aluminium 7075 T651 Sheets deliver exceptional yield strength, superior stress-corrosion resistance, and high fatigue performance for critical aerospace and defense components.
As a trusted Aluminium 7075 T651 Sheets & Plates Supplier, we process flat stock to tight thickness tolerances, supplying every batch with EN 10204 3.1 Material Test Certificates (MTC), non-destructive testing logs, and spectro chemical validations.
As a globally recognized Aluminium 7075 T651 Sheets & Plates Exporter, we ship certified structural plates across the Middle East, Europe, Southeast Asia, and North America. Also explore our Aluminium 2024 Sheets & Plates built for high-fatigue aircraft structural applications.
| Parameter | Specification Details |
|---|---|
| Standard | ASTM B209, ASME SB209, AMS 4045, AMS 4078, EN 485, QQ-A-250/12 |
| Technique | Hot Rolled Plate (HR), Cold Rolled Sheet (CR) |
| Thickness | 0.25 mm to 200 mm |
| Width | 1000 mm to 3500 mm |
| Length | 2000 mm to 12000 mm (or custom cut-to-size dimensions) |
| Surface Finish | 2B, 2D, BA, No. 1, No. 4, No. 8, 8K Mirror, Hairline, Sand Blast, Brushed, Etched, Checkered, Embossed |
| Value Added Services | Waterjet Precision Cutting, CNC Milling, Custom Shearing, UT Inspection |
Sheets & Plates Weight Calculator
Theoretical Density: 2.81 g/cm³
| Aluminium | UNS | EN | DIN / WNr | JIS | ISO |
|---|---|---|---|---|---|
| 7075 T651 | A97075 | EN AW-7075 | 3.4365 / AlZnMgCu1.5 | 7075 | AlZn6MgCu |
| Element | Minimum (%) | Maximum (%) |
|---|---|---|
| Silicon (Si) | — | 0.40 |
| Iron (Fe) | — | 0.50 |
| Copper (Cu) | 1.20 | 2.00 |
| Manganese (Mn) | — | 0.30 |
| Magnesium (Mg) | 2.10 | 2.90 |
| Chromium (Cr) | 0.18 | 0.28 |
| Zinc (Zn) | 5.10 | 6.10 |
| Titanium (Ti) | — | 0.20 |
| Others (Each) | — | 0.05 |
| Others (Total) | — | 0.15 |
| Aluminium (Al) | Remainder | Remainder |
| Property Parameter | Value / Range |
|---|---|
| Tensile Strength | 78 – 67 ksi (538 – 462 MPa) |
| Yield Strength (0.2%) | 67 – 54 ksi (462 – 372 MPa) |
| Elongation (% in 2") | 9 – 3% |
| Brinell Hardness | 150 HBW |
As a recognized Aluminium 7075 T651 Sheets & Plates Exporter, Nirvaan Overseas delivers fully certified material worldwide:
Mumbai
Pune
Chennai
Faridabad
Saudi Arabia
Qatar
Oman
Kuwait
Germany
Italy
Netherlands
Poland
Singapore
Malaysia
Vietnam
Indonesia
Michigan
Illinois
Texas
| Inspection Method | Evaluation Parameters |
|---|---|
| Spectro Chemical PMI | Verifies chemical composition and key alloying element balances (Zn, Mg, Cu). |
| Dimensional Metrology | Vernier Caliper and Micrometer gauge checks ensuring thickness, width, and flatness tolerances. |
| Ultrasonic Testing (UT) | Non-destructive scanning per ASTM A388 / ASTM A578 checking internal soundness and laminar flaws. |
| Mechanical & Hardness | Room-temperature tensile, yield, elongation %, and Brinell hardness testing against AMS limits. |
| Traceability & Certification | Heat number traceability with EN 10204 3.1 Mill Test Certificates (MTC) and optional third-party testing (SGS/TUV). |
The T651 temper means the material has been mechanically stretched after solution heat treatment. This process relieves internal stress, ensuring Aluminium 7075 T651 Plates do not warp, twist, or bend when machined on CNC routers.
Grade 7075 T651 is generally not recommended for standard fusion welding because of its high copper and zinc content, which causes heat cracking. Mechanical fastening or specialized friction-stir welding is preferred.
As a certified Aluminium 7075 T651 Sheets & Plates Supplier, we provide EN 10204 3.1 Mill Test Certificates covering spectro analysis, tensile testing, temper compliance, and ultrasonic verification logs.
Yes, as an established Aluminium 7075 T651 Sheets & Plates Exporter, we regularly supply certified aerospace-grade stock directly to engineering and defense hubs in Michigan, Illinois, Texas, and across the US.
Yes, we provide precision waterjet cutting, custom shearing, and CNC plate sawing to deliver Aluminium 7075 T651 Sheets tailored directly to your exact project dimensions.
Contact Nirvaan Overseas for competitive factory pricing, precision cut-to-size options, and fast international delivery on Aluminium 7075 T651 Sheets & Plates. Connect with our technical sales team via email or WhatsApp to receive an instant project quote.