Office Address
- G/81, Ground Floor, C Sarvodaya Nagar, Panjrapole 1st Lane Madhav Baug, Mumbai - 400004
- sales@nirvaanoverseas.com
- +91 77386 88058
- +91 2231447403 Call Now
Office Address
Technical Product Details
| Material Grade | Nickel-Iron-Chromium-Molybdenum-Copper Alloy (Inconel 825 / Incoloy 825 / UNS N08825 / WNr 2.4858 / NiCr21Mo). |
| Governing Specifications | ASTM B424, ASME SB424, DIN 17750, EN 2.4858. |
| Available Tempers | Solution Annealed, Annealed. |
| Dimensional Scope | Thickness: 0.5 mm to 100 mm | Width: 1000 mm to 2500 mm | Length: 2000 mm to 6000 mm (Cut-to-Size available). |
| In-House Quality Verification | Spectro Chemical PMI, Vernier Caliper & Micrometer Dimensional Checks, Ultrasonic Testing (UT) per ASTM A388/A578, EN 10204 3.1 Mill Test Certificates. |
Table of Contents
Nirvaan Overseas is a premier Inconel 825 Sheets & Plates Manufacturer in India, precision-rolling nickel-iron-chromium alloy stock. Inconel 825 Sheets provide exceptional resistance to reducing and oxidizing acids, particularly sulfuric and phosphoric acid solutions, under severe chemical processing environments.
As a trusted Inconel 825 Sheets & Plates Supplier, we process flat stock to tight thickness tolerances, supplying every batch with EN 10204 3.1 Material Test Certificates (MTC), non-destructive testing logs, and spectro chemical validations.
As a globally recognized Inconel 825 Sheets & Plates Exporter, we ship certified corrosion-resistant plates across the Middle East, Europe, Southeast Asia, and North America. Also explore our Hastelloy C276 Sheets & Plates built for extreme severe-chemical and wet chlorine applications.
| Parameter | Specification Details |
|---|---|
| Standard | ASTM B424, ASME SB4424, DIN 17750, EN 2.4858 |
| Technique | Hot Rolled Plate (HR), Cold Rolled Sheet (CR) |
| Thickness | 0.5 mm to 100 mm |
| Width | 1000 mm to 2500 mm |
| Length | 2000 mm to 6000 mm (or custom cut-to-size dimensions) |
| Surface Finish | 2B, 2D, BA, No. 1, No. 4, No. 8, 8K Mirror, Hairline, Sand Blast, Brushed, Etched, Checkered, Embossed |
| Value Added Services | Plasma Cutting, Laser Cutting, Precision Waterjet, Edge Beveling |
Sheets & Plates Weight Calculator
Theoretical Density: 8.14 g/cm³
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | AFNOR | EN |
|---|---|---|---|---|---|---|
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | NFE30C20DUM | NiCr21Mo |
| Element | Composition Limit (%) |
|---|---|
| Carbon (C) | 0.05 max |
| Manganese (Mn) | 1 max |
| Silicon (Si) | 0.5 max |
| Sulfur (S) | 0.03 max |
| Copper (Cu) | 1.50 – 3 |
| Iron (Fe) | 22.00 min |
| Nickel (Ni) | 38 – 46 |
| Chromium (Cr) | 19.50 – 23.50 |
| Aluminium (Al) | 0.02 max |
| Titanium (Ti) | 0.06 – 1.20 |
| Property Parameter | Value / Range |
|---|---|
| Alloy Density | 8.14 g/cm3 |
| Melting Point | 1400°C (2550°F) |
| Tensile Strength | 80,000 psi (550 MPa) |
| Yield Strength (0.2% Offset) | 32,000 psi (220 MPa) |
| Elongation (% in 2") | 30% |
As a recognized Inconel 825 Sheets & Plates Exporter, Nirvaan Overseas delivers fully certified material worldwide:
Mumbai
Pune
Chennai
Faridabad
Saudi Arabia
Qatar
Oman
Kuwait
Germany
Italy
Netherlands
Poland
Singapore
Malaysia
Vietnam
Indonesia
Michigan
Illinois
Texas
| Inspection Method | Evaluation Parameters |
|---|---|
| Spectro Chemical PMI | Verifies chemical composition and element balance (Ni, Fe, Cr, Cu, Ti). |
| Dimensional Metrology | Vernier Caliper and Micrometer gauge checks ensuring thickness, width, and flatness tolerances. |
| Ultrasonic Testing (UT) | Non-destructive scanning per ASTM A388 / ASTM A578 checking internal soundness and core defects. |
| Mechanical Testing | Room-temperature tensile strength, yield strength, elongation %, and hardness verification per ASTM B424. |
| Traceability & Certification | Heat number traceability with EN 10204 3.1 Mill Test Certificates (MTC) and optional third-party testing (SGS/TUV). |
Inconel 825 contains added copper and titanium with a higher iron content, making it specifically optimized for sulfuric and phosphoric acid resistance, whereas Inconel 625 uses niobium and molybdenum for extreme high-temperature strength.
Titanium stabilizes Inconel 825 Plates against chromium carbide precipitation during welding, ensuring the material maintains full corrosion resistance in welded assemblies without post-weld heat treatment.
Yes, as an established Inconel 825 Sheets & Plates Exporter, we regularly ship certified nickel alloy stock to industrial clients in Germany, Italy, Netherlands, and Poland.
Yes, we provide fast direct export shipments across the region, delivering certified project orders to customers in Saudi Arabia, Qatar, Oman, and Kuwait.
Yes, we regularly export certified acid-resistant plate stock directly to chemical processing and energy hubs in Michigan, Illinois, Texas, and across the US.
Contact Nirvaan Overseas for competitive factory pricing, precision cut-to-size options, and fast international delivery on Inconel 825 Sheets & Plates. Connect with our technical sales team via email or WhatsApp to receive an instant project quote.